This Cry Baby Wah features the legendary Fasel® inductor, a focused high end, and an aggressive wah sound.

This pedal can be powered by a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).

POWER
The Original Cry Baby® can be powered by one 9 volt battery (accessed via the bottom of the pedal), a Dunlop ECB003 AC adapter (ECB003E in Europe) or a Dunlop DCB10 DC Brick power supply.
SETUP INSTRUCTIONS•
Run a shielded instrument cable from yourguitar to the GCB95’s Instrument jack.• Run another shielded instrument cable from the GCB95’s Amplifier jack into your amplifier input.• Turn on the amplifier and begin playing.• To turn the pedal on/off, push the toe of the pedal down until you feel a “click”.• By rocking your foot back and forth on the pedal, you can change the effect that the Original Cry Baby has on the tone of your instrument instantaneously.
SPECIFICATIONS
ImpedanceInput 800 kΩOutput 10 kΩFilter Parameter Low Pass 350 Hz ~ 450 Hz High Pass 1.5 kHz ~ 2.5 kHzMaximum LevelInput -8.0 dBV Output +10 dBVMaximum Gain Heel Down +19.5 dB Toe Down +19 dBSignal to Noise Ratio*Heel Down 98 dBV Toe Down 89 dBVCurrent Draw 900μA*OdBV = 1VRMS, A-weighted