The Volume (X) Mini Pedal controls volume and FX parameters without crowding your pedalboard, featuring a lightweight aluminum chassis, aggressive non-slip tread, and our patented Low Friction Band-Drive for a smooth range of motion and consistent, reliable performance. For maximum comfort and precision, the DVP4’s rocker tension is fully adjustable.
DVP4 VOLUME (X)™ MINI PEDAL
• Controls volume and FX pedals with precision• Patented Low Friction Band-Drive for durable action• Fully adjustable rocker tension
AUX output for use with a tuner or to control an FX pedal parameter (toggled by TUNER/EXP switch)50 kΩ TRIMPOT (internal) sets FX parameter’s minimum level when using Expression Mode TIP/RING switch (internal) switch toggles heel/toe polarity of Expression Mode (set to TIP by default)TUNER/EXP switch (internal) toggles AUX output functionality (set to EXP by default)
The DVP4 does not require a power source to operate.
We recommend placing the DVP4 first in your signal chain. Run a cable from your guitar to the DVP4’s INPUT jack.
To adjust rocker torque, place pedal in toe-down position. Insert a 1/4" flat blade screwdriver into torque-adjust screw located under heel-end of rocker pedal. Turn clockwise to increase resistance or counterclockwise to decrease resistance.
VOLUME MODE (250 KΩ POT)
• Run a cable from the DVP4’s OUTPUT jack to your amplifier.• With the pedal fully toe-down, set your guitar and amp’s maximum desired volume level.• Moving the rocker toward the heel-down position decreases output level, muting the signal when fully heel-down.• Optional: To connect a tuner, set TUNER/EXP switch to the TUNER position and run a cable from the AUX output to a tuner. Signal to tuner is always active.
EXPRESSION MODE (10 KΩ POT)
• Set TUNER/EXP switch to the EXP position. Run a stereo or TRS cable from the DVP4’s AUX jack to your FX pedal’s expression jack.• With the pedal fully toe-down, set the FX parameter you want to control to the desired maximum level.• Optional: To set the parameter’s minimum level, use internal TRIMPOT. Turn it clockwise to raise minimum level or counterclockwise to lower it. Factory setting is fully counterclockwise.• Move the rocker pedal toward the heel-down position to lower the FX parameter value within range set by FX pedal and the DVP4’s internal TRIMPOT. • Optional: Use internal TIP/RING switch to reverse the DVP4’s heel/toe functionality.