Audio Technica ATW-2110b I Band UHF Wireless System Transmitter & Receiver Only
Audio Technica ATW-2110b I Band UHF Wireless System Transmitter & Receiver Only
Audio Technica ATW-2110b I Band UHF Wireless System Transmitter & Receiver Only
Audio Technica ATW-2110b I Band UHF Wireless System Transmitter & Receiver Only
Audio Technica ATW-2110b I Band UHF Wireless System Transmitter & Receiver Only

Audio Technica ATW-2110b I Band UHF Wireless System Transmitter & Receiver Only

Regular price $329.00
Unit price  per 
Shipping calculated at checkout.

Rock-Solid, Dependable Performance

Audio-Technica's 2000 Series is a 10-channel frequency-agile UHF wireless system designed to suit a variety of applications, including MI/live performance, fixed installation, public address, A/V rental houses and places of worship. It offers all the advantages of a high-quality, professional wireless system at an extremely affordable price.

Features switchable antenna power. Also, the optional ATW-CHG2 two-bay recharging station provides power to recharge NiMH batteries in two ATW-T220a handheld transmitters and/or ATW-T210a body-pack transmitters in any combination. Offering 10 selectable channels and True Diversity UHF wireless technology, the 2000 Series features automatic frequency scanning. At the touch of a button, this function automatically determines and sets the best available frequency. Any of the 2000 Series' 10 channels may be used together without any frequency coordination problems or group selection issues. The 2000 Series also incorporates Audio-Technica's Tone Lock™ squelch plus an easy-to-read LCD information display.

  • Serious advances in affordable professional wireless
  • Clear sound quality and rock-solid, dependable performance
  • Automatic frequency scanning
  • 10 compatible user-switchable channels
  • Antenna power available for powered antennas & other in-line RF devices
  • True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
  • Tone Lock™ tone squelch system fights interference
  • Rugged metal half-rack receiver with soft-touch controls and LCD display
  • Balanced XLR and unbalanced 1/4” output jacks enable use with a wide variety of audio gear
  • Switchable transmitter power output with high and low settings offered
  • Includes rack-mount kit and detachable UHF antennas
  • Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
  • ATW-CHG2 charger available for ATW-T220a & ATW-T210a transmitters
Overall System
Operating Frequencies UHF
Band D: 656.125 to 678.500 MHz DISCONTINUED IN NORTH AMERICA

Band I : 487.125 to 506.500 MHz
Modulation Mode FM
Maximum Deviation ±40 kHz
Frequency Response 100 Hz to 15 kHz (+1 dB, -3 dB)
Operating Range 100 m (300'), typical
Open range environment with no interfering signals.
Total Harmonic Distortion < 1% (at 1 kHz, ±20 kHz deviation)
Operating Temperature Range 5º C to 45º C
41º F to 113º F
Battery and LCD performance may be reduced at very low temperatures.
Number Of Channels 10 total

 

Body Pack
RF Power Output High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Battery Life High: 7 hours (alkaline)
Low: 9 hours (alkaline)
Depending on battery type and use pattern.
Battery Type Two 1.5V AA alkaline (not included)
or two 1.2V AA NiMH (not included)

Recharging power for NiMH batteries (with ATW-CHG2)
U.S./Canada/Latin America: 3.2 V DC, 230 mA x2
Other world areas: 3.2 V DC, 320 mA x2
Dimensions 66.0 mm (2.60") W x
22.5 mm (0.89") D x
92.3 mm (3.63") H
Input Connections Four-pin Locking Connector
Pin 1: GND
Pin 2: INST INPUT
Pin 3: MIC INPUT
Pin 4: DC BIAS +9V
Net Weight 81 g (2.9 oz), without batteries
Spurious Emissions Following federal and national regulations
Receiver
Receiving System True diversity
Image Rejection 60 dB nominal, 55 dB minimum
RF Sensitivity 20 dBuV at 60 dB S/N ratio
(50 ohms termination)
Antenna Input BNC-type, 50 ohms
Bias voltage 12V DC, 60 mA, each
Power Requirements 12-18V DC, 500 mA
Dimensions 210.0 mm (8.27") W x
162.2 mm (6.39") D x
44.0 mm (1.73") H
Not including BNC connectors or feet.
Weight 1.0 kg (35.3 oz), without accessories
Accessories Included Two flexible UHF antennas; AC adapter (country dependent); rack-mount adapters

ADDITIONAL RECEIVER SPECS

Maximum Output Level:
XLR, balanced: +9 dBV
¼" (6.3 mm), unbalanced: +4 dBV
Balanced Audio Output Attenuator:
Two position switch: 0 / -12 dB